Your Cart
Free Shipping Within USA on all products Shop now


  • PREMIUM COMPONENT SPEAKER - The SQCOMP 6.5" inch speaker and 1.10-inch Tweeter delivers 300 MAX Watts. For those who love quality sound and need to upgrade those speakers that came with the car, this component speakers are the perfect solution.
  • SPEAKERS - The DS18 SQCOMP speakers provide 180 MAX Watts sound quality system as they are full range frequencies giving you low/mid/high pitches. We designed them especially for those seeking speakers that are just beautiful and match with most cars.
  • TWEETERS - The DS18 SQTW Silk Dome Tweeters designed with neodymium magnet. 120 MAX Watts to be loud and have no distortion at any volume. Built-in switch (+2/0/-2)dB to make it louder and higher at +2, make it a more sound quality at -2, or standard at 0
  • CROSSOVERS - To increase the sound quality we added two crossovers that filter the pith of the sound to the proper speaker/tweeter for best performance and quality.
  • SIZE - Speakers: Mounting Depth: 2.56 (65mm) / Mounting Diameter: 5.31 (135mm); Tweeters: Mounting Depth: 2.4" (61mm) / Mounting Diameter: 2.45" (62.4mm)

Style:6.5" in. Component Speakers Set

This is the perfect bundle kit to upgrade your audio system if you want it louder with quality sound and style to your vehicle. This set can be a DIY installation. We recommend professional installation in order to prevent any malfunction. With proper installation, this component speaker will warrant a long-lasting, deep sounding experience for any deal-seeking audiophile capable of delivering up to 300 watts of power.

The DS18 SQCOMP component speaker Set Includes:

  • 2 x Component speakers
  • 2 x Crossover (Tweeter & Woofer)
  • 2 x SQTW Tweeters

    SQCOMP Speakers
  • 6.5” Component Speaker 4-Ohms
  • RMS Power: 60 Watts
  • MAX Power: 180 Watts
  • Sensitivity: 91dB
  • Frequency Response: 45Hz - 20KHz
  • Impedance: 4 OHM
  • Magnet: NdFeB (Woofer: N35)
  • Cone: Woofer: Polymerization Resin + High Foam Edge
  • Voice Coil: Woofer Diameter: 1.18-Inch (Φ30mm)
  • Cone Stand Structure: Integrated Structure
  • Mounting Depth: 65mm / 2.55"
  • Mounting Diameter: 135mm / 5.31"

    Tweeter Crossover
  • Frequency Crossover: 3.5kHz
  • Frequency Response Crossover: 12dB

    Woofer Crossover
  • Frequency Crossover: 3.5kHz
  • Frequency Response Crossover: 6dB

    SQTW Tweeters
  • Frequency: 2Hz-20kHz
  • Sensitivity: 88dB
  • RMS Power: 40 Watts
  • MAX Power: 120 Watts
  • Nominal Impedance: 4 Ohms
  • Voice Coil Diameter: 1.10-Inch (28mm)
  • Voice Coil Former Material: ASV
  • Magnet Material: Neodymium
  • Built In Attenuation Switch (+2/0/-2)dB
  • Basket Material: Plastic
  • Overall Depth: 61mm / 2.4"
  • Overall Width: 62.4mm / 2.45"
  • Overall Height: 58.1mm / 2.29"
  • Overall Diameter: 62.4mm / 2.45"

Write a review
Note: HTML is not translated!
Bad Good